TRUCK CRANE/TRUCK MOUNTED CRANE (HIAB) – C32 Courses Training | WhatsApp: +27731582436

TRUCK CRANE/TRUCK MOUNTED CRANE (HIAB) – C32

Learners per Program

1 – 4 (max 4)

Client to supply Load Test Certificate for particular machine crane.

Learner Program Content

• Introduction/registration

• Unit standard – operating a truck mounted crane – saqa id 242978

• Types of cranes

• Major components

• Legislation

• Pre operational checks

• Control and operational checks

• Setting up the crane

• Stowing the crane

• Hand signals

• Types of lifting equipment

• Inspection of lifting equipment

• Correct use of lifting equipment

• Lifting and transporting loads

• Safety aspects

• Theoretical assessment

• Practical assessment

Entrance Requirements for Novice Learners

• Certified copy of the learner’s National Identity Document

• Learners must be a minimum of 18 (eighteen) years of age at the start of the learning program

• Learners must be physically capable of performing without difficulty at the tasks associated with and involved in operating the lifting machine

• A declaration of the employer confirming that the learner is physically and psychologically fit to undergo the intended training

• A medical certificate issued by an Occupational Health Practitioner confirming the physical, psychological and medical fitness of the learner

• An optometrist certificate confirming the learner has adequate day and night vision (eg Purdue University Standard Vision Test No 3) or valid Professional Driver’s Permit can be accepted in lieu of the optometrist certificate (refer to Government Gazette No 34876)

• Possession and wearing of the personal protective equipment as prescribed by the employer in terms of the General Safety Regulation 2 of the Occupational Health and Safety Act

• A General Education and Training Certificate Grade 10 (Standard 8) or NQF Level 2 Equivalent or Equivalent with Math and English

• Appropriate driver’s license for the particular vehicle, depending on weight or mass of vehicle – EC or EC1 is a must

• Protective footwear (steel toe-capped)

Entrance Requirements for Refresher Learners

All requirements for novice learners excluding the General Education and Training Certificate Grade 9 and the following:

A valid operator’s certificate about to expire or have not expired more than 90 (ninety) days prior to the commencement of the refresher learning program

Accreditation and Unit Standard for this Program

• Transport Education and Training Authority (TETA 04-133)

• Unit Standard Number: 242978

Learners per Program call +27731582436

1 – 4 (max 4)

Client to supply Load Test Certificate for particular machine crane.

Learner Program Content

• Introduction/registration

• Unit standard – operating a truck mounted crane – saqa id 242978

• Types of cranes

• Major components

• Legislation

• Pre operational checks

• Control and operational checks

• Setting up the crane

• Stowing the crane

• Hand signals

• Types of lifting equipment

• Inspection of lifting equipment

• Correct use of lifting equipment

• Lifting and transporting loads

• Safety aspects

• Theoretical assessment

• Practical assessment

Entrance Requirements for Novice Learners

• Certified copy of the learner’s National Identity Document

• Learners must be a minimum of 18 (eighteen) years of age at the start of the learning program

• Learners must be physically capable of performing without difficulty at the tasks associated with and involved in operating the lifting machine

• A declaration of the employer confirming that the learner is physically and psychologically fit to undergo the intended training

• A medical certificate issued by an Occupational Health Practitioner confirming the physical, psychological and medical fitness of the learner

• An optometrist certificate confirming the learner has adequate day and night vision (eg Purdue University Standard Vision Test No 3) or valid Professional Driver’s Permit can be accepted in lieu of the optometrist certificate (refer to Government Gazette No 34876)

• Possession and wearing of the personal protective equipment as prescribed by the employer in terms of the General Safety Regulation 2 of the Occupational Health and Safety Act

• A General Education and Training Certificate Grade 10 (Standard 8) or NQF Level 2 Equivalent or Equivalent with Math and English

• Appropriate driver’s license for the particular vehicle, depending on weight or mass of vehicle – EC or EC1 is a must

• Protective footwear (steel toe-capped)

Entrance Requirements for Refresher Learners

All requirements for novice learners excluding the General Education and Training Certificate Grade 9 and the following:

A valid operator’s certificate about to expire or have not expired more than 90 (ninety) days prior to the commencement of the refresher learning program

Accreditation and Unit Standard for this Program

• Transport Education and Training Authority (TETA 18-1003)

• Unit Standard Number: 242978

 MULANI OPERATORS TRAINING SCHOOL - +27731582436
Website : www.mulanitraining.co.za
Tell: 0110664938 Cell: 0731582436
FREE ACCOMMODATION + JOB ASSISTANCE AFTER TRAINING
call us /Whatsapp : +27731582436